Products list |

RL
Oil Lubrication |
Medium
pressure and Vacuum use
Maxi. pressure:10,000mmAq
Maxi. Vacuum :- 500mmHg
Recommended pressure operating range=6,000 ~ 8,000mmAq
Bore size:50A,65A,80A,100A,125A,150A,200A,250A,300A.
|

RW
Water-cooling Design |
High
pressure and Vacuum use
Maxi. pressure:12,000mmAq
Maxi. Vacuum :- 600mmHg
Recommended pressure operating range=8,000~10,000mmAq
Bore size:50A,65A,80A,100A,125A,150A,200A,250A,300A. |
Pressure Operation package |
Showfou
also supply our customer the complete set roots blower for pressure operation with the
standard accessories.
The standard accessories are as
follows:
| No. |
Name |
No. |
Name |
| 1 |
Blower body |
7 |
Base plate |
| 2 |
Motor |
8 |
T-type reducer |
| 3 |
Blower pulley |
9 |
Pressure safety valve |
| 4 |
Suction silencer set
(with air filter and cover) |
10 |
Check valve |
| 11 |
Ball valve |
| 5 |
V-belt |
12 |
Pressure gauge |
| 6 |
Belt cover |
13 |
Gauge pipe |
|

Vacuum Operation package
|
Showfou
also supply our customer the complete set roots blower for Vacuum operation with the
standard accessories.
The standard accessories are as
follows:
| No. |
Name |
No. |
Name |
| 1 |
Blower body |
7 |
Base plate |
| 2 |
Motor |
14 |
90 degree elbow |
| 3 |
Blower pulley |
15 |
Vacuum safety valve |
| 4 |
Discharge
silencer set
(with air filter and cover) |
10 |
Check valve |
| 11 |
Ball valve |
| 5 |
V-belt |
16 |
Suction filter
tank
(with vacuum gauge) |
| 6 |
Belt cover |
|
Advantage of 3 lobes' rotor design |
Owing to new 3 lobes' rotor
design ,
the reverse flow pressure variation period is only 2/3 of that of a conventional
2 lobes' rotor, the peak pressure is also lower. So the noise and pressure pulsation are
greatly limited. |
- Less back flow, steady
air flow rate, lower vibration and noise.
- Discharge pressure pulsation are
reduced, so lighter loading of bearings and timing gears
ensures the long servicing life.
- Adequate clearance between the rotors and the rotors with the casing ensure no contact
during operation, and this make the efficiency even higher.
- The rotors are dynamically balanced in the fabrication stage
already, so these rotor are
almost free from vibration.
|