SINGLE STAGE INSTALLATION:
● Maxi. Pressure: 10,000 mmAq (1.0 kg/cm2)
● Maxi. Vacuum: -6,700 mmAq
DOUBLE STAGE INSTALLATION:
● Maxi. Pressure: 15,000 mmAq (1.5 kg/cm2)
● Maxi. Vacuum: -8,100 mmAq
-
ADOPTED WITH TRI-LOBE'S ROTOR NEW DESIGN FOR HIGHER EFFICIENCY.
-
Bore size : 40 mm(1-1/2") ~ 300 mm (12")
-
Recommended pressure operating range: 1,000 ~ 8,000 mmAq
-
RL series: Oil Lubrication for Gear Box, Front Bearing, and Rear Bearing.
- Description
- The Standard Accessories
of RLC(Pressure Operation) - The Standard Accessories
of RLV(Vacuum Operation) - Order Enquiry
- Documents
We produce robust, heavy-duty tri-lobe design roots air blower (2″ – 12″) that deliver reliable performance for low noise, and low pulsation compression.
CHARACTERISTICS
-
Produce a constant flow of gas at different pressures.
-
No Contamination: The pumped gas does not get contaminated as there are no lubricants in the area where the compression occurs.
-
Gear Box, Front Bearing and Rear Bearing: Oil Lubrication for its components.
ADVANTAGE OF TRI-LOBE' ROTOR DESIGN
-
Less backflow, steady air flow rate, lower vibration, and noise.
-
Long Servicing Life: With reduced discharged pressure pulsation, it leads to lighter loading of bearings and timing gears for longer operation life.
-
Large Air Flow: On the same operating speed, the tri-lobe roots blower can deliver large airflow and volume than the conventional 2 lobes type.
-
High Efficiency: Adequate clearance between the rotors and the casing ensures no contact during operation, and this makes even higher efficiency.
-
High Precision in rotors: The precision of rotors is fully controlled by the CNC machine and variation of precision between blowers is almost nil.
-
Free From Vibration: The rotors are dynamically balanced in the fabrication stage already, so rotors are almost free from vibration.
SPECIFICATION
| Bore | Bare Shaft | Complete set (RLC) | Complete Set (RLV) | |
|---|---|---|---|---|
| (mm) | (inch) | Blower Body | Pressure Operation Package | Vacuum Operation Package |
| 40 | 1.5" | RL-40 | RLC-40 | - |
| 50 | 2" | RL-50 | RLC-50 | RLV-50 |
| 65 | 2.5" | RL-65 | RLC-65 | RLV-65 |
| 80 | 3" | RL-80 | RLC-80 | RLV-80 |
| 100 | 4" | RL-100 | RLC-100 | RLV-100 |
| 125 | 5" | RL-125 | RLC-125 | RLV-125 |
| 150 | 6" | RL-150 | RLC-150 | RLV-150 |
| 200 | 8" | RL-200 | RLC-200 | RLV-200 |
| 250 | 10" | RL-250 | RLC-250 | RLV-250 |
| 300 | 12" | RL-300 | RLC-300 | RLV-300 |
Used in conditions from a strong vacuum to high pressure in various industries, especially in wastewater treatment plants.
PRESSURE OPERATION for Roots Air Blower
-
Compressed air for gas burners, coke-fired forges, small foundry cupolas in:
-
Iron & steel industries, non-ferrous metal refineries, smelters & foundries.
-
Food processing, bakeries.
-
Chemical plants.
-
Glass, ceramics, brick.
-
Oil, tar & asphalt heaters.
-
Pipe, wrapping machines.
-
Drying:
-
Air and sandblasting.
-
Grain conditioning & storage.
-
Supercharging.
-
Dusting and spraying.
-
Drums drying and cleaning.
-
Sand filter regeneration.
-
Pressurizing paper mill headboxes.
-
Aerating and agitating liquids in:
-
Waste treatment plants.
-
Oyster washing.
-
Oil blending.
-
Ice manufacturing, prevention of ice formation in power plants.
-
Chemical processes.
-
Fish ponds, lakes.
-
Vinegar blending.
-
Asphalt refining.
-
Pneumatic conveying:
-
Granular materials.
-
Insulation blowing.
-
Grain conveying.
-
Fluidizing.
-
Pulp conveying.
-
Wood and metal chip conveying.
-
Rock dusting.
-
Flour and powder.
VACUUM OPERATION for Roots Air Blower
-
Industrial and commercial vacuum cleaning.
-
Paper folding machinery.
-
Garment presses.
-
Bottle and tube filling machines.
-
Pump priming.
-
Dust collecting.
RLC type Complete Set Roots Blower with Standard Accessories:
| No. | Name of Accessory | No. | Name of Accessory |
|---|---|---|---|
| 1 | Blower Body | 8 | T-type Reducer |
| 2 | Four(4) Poles Motor [Optional] | 9 | Pressure Safety Valve |
| 3 | Blower Pulley | 10 | Check Valve |
| 4 | Suction Silencer Set (with air filter and cover) | 11 | Ball Valve |
| 5 | V-belt [Optional] | 12 | Pressure Gauge |
| 6 | Belt Cover | 13 | Gauge Pipe |
| 7 | Base Plate | - | - |
RLV type Complete Set Roots Blower with Standard Accessories:
| No. | Name of Accessory | No. | Name of Accessory |
|---|---|---|---|
| 1 | Blower Body | 6 | Belt Cover |
| 2 | Four(4) Poles Motor [Optional] | 7 | Base Plate |
| 3 | Blower Pulley | 14 | 90 degree elbow |
| 4 | Discharge Silencer Set (with air filter and cover) | 15 | Vacuum safety valve |
| 5 | V-belt [Optional] | 16 | Suction Filter Tank(with Vacuum Gauge) |
Order Enquiry Form
