RW, RWC, RWV series Water-Cooled Tri-Lobe Roots Blower

SINGLE STAGE INSTALLATION:
● Maxi. Pressure: 12,000 mmAq (1.2 kg/cm2)
● Maxi. Vacuum: -8,100 mmAq
DOUBLE STAGE INSTALLATION:
● Maxi. Pressure: 20,000 mmAq (2.0 kg/cm2)
● Maxi. Vacuum: -8,800 mmAq

  • HIGHER PRESSURE AND VACUUM CAPABILITY WITH WATER JACKET COOLING DESIGN.

  • BORE SIZE: 50 mm(2") ~ 300 mm (12")

  • Recommended pressure operating range: 8,000 ~ 10,000 mmAq.

  • RW series: WATER-JACKET TO PASS THROUGH GEARBOX AND BEARINGS FOR COOLING.

We produce robust, heavy-duty tri-lobe design roots blower (2″-12″) that deliver reliable performance for low noise, and low pulsation compression.

CHARACTERISTICS

  • Produce a constant flow of gas at different pressures.

  • No Contamination: The pumped gas does not get contaminated as there are no lubricants in the area where the compression occurs.

  • Gear Box, Front Bearing and Rear Bearing: Oil Lubrication and Water-Jacket Cooling Feature.

  • Front Bearing: Grease Lubrication and Water-Jacket Cooling Feature

ADVANTAGE OF TRI-LOBE' ROTOR DESIGN

Owing to the new tri-lobe rotor design in our roots blower, the reverse flow pressure variation period is only 2/3 of that of a conventional bi-lobe’ rotor, the peak pressure is also lower. So the noise and pressure pulsation is greatly limited.
  • Less backflow, steady air flow rate, lower vibration, and noise.

  • Long Servicing Life: With reduced discharged pressure pulsation, it leads to lighter loading of bearings and timing gears for longer operation life.

  • Large Air Flow: On the same operating speed, the tri-lobe roots blower can deliver large airflow and volume than the conventional 2 lobes type.

  • High Efficiency: Adequate clearance between the rotors and the casing ensures no contact during operation, and this makes even higher efficiency.

  • High Precision in rotors: The precision of rotors is fully controlled by the CNC machine and variation of precision between blowers is almost nil.

  • Free From Vibration: The rotors are dynamically balanced in the fabrication stage already, so rotors are almost free from vibration.

SPECIFICATION

BoreRW
(Bare Shaft)
RWC
( Complete set )
RWV
( Complete set )
Cooling Water
Volume
(mm)(inch)BlowerPressure Operation PackageVacuum Operation PackageL/min
502"RW-50RWC-50RWV-504
652.5"RW-65RWC-65RWV-656
803"RW-80RWC-80RWV-808
1004"RW-100RWC-100RWV-10010
1255"RW-125RWC-125RWV-12512
1506"RW-150RWC-150RWV-15015
2008"RW-200RWC-200RWV-20020
25010"RW-250RWC-250RWV-25025
30012"RW-300RWC-300RWV-30030

Used in conditions from a strong vacuum to high pressure in various industries, especially in the wastewater treatment plants.

PRESSURE OPERATION for Roots Blower

     Compressed air for gas burners, coke-fired forges, small foundry cupolas in:
  • Iron & steel industries, non-ferrous metal refineries, smelters & foundries.

  • Food processing, bakeries.

  • Chemical plants.

  • Glass, ceramics, brick.

  • Oil, tar & asphalt heaters.

  • Pipe, wrapping machines.

     Drying:
  • Air and sandblasting.

  • Grain conditioning & storage.

  • Supercharging.

  • Dusting and spraying.

  • Drums drying and cleaning.

  • Sand filter regeneration.

  • Pressurizing paper mill headboxes.

     Aerating and agitating liquids in:
  • Waste treatment plants.

  • Oyster washing.

  • Oil blending.

  • Ice manufacturing, prevention of ice formation in power plants.

  • Chemical processes.

  • Fish ponds, lakes.

  • Vinegar blending.

  • Asphalt refining.

     Pneumatic conveying:
  • Granular materials.

  • Insulation blowing.

  • Grain conveying.

  • Fluidizing.

  • Pulp conveying.

  • Wood and metal chip conveying.

  • Rock dusting.

  • Flour and powder.

VACUUM OPERATION for Roots Blower

  • Industrial and commercial vacuum cleaning.

  • Paper folding machinery.

  • Garment presses.

  • Bottle and tube filling machines.

  • Pump priming.

  • Dust collecting.


RW, RWC, RWV Roots Blowers Catalog
RLC Roots Blowers - Complete Set RWC type Complete Set Roots Blower with Standard Accessories:
No.Name of AccessoryNo.Name of Accessory
1Blower Body8T-type Reducer
2Four(4) Poles Motor [Optional]9Pressure Safety Valve
3Blower Pulley10Check Valve
4Suction Silencer Set (with air filter and cover)
11Ball Valve
5V-belt [Optional]12Pressure Gauge
6Belt Cover13Gauge Pipe
7Base Plate--
RLV Roots Blowers - Complete Set

RWV type Complete Set Roots Blower with Standard Accessories:

No.Name of AccessoryNo.Name of Accessory
1Blower Body6Belt Cover
2Four(4) Poles Motor [Optional]7Base Plate
3Blower Pulley1490 degree elbow
4Discharge Silencer Set (with air filter and cover)15Vacuum safety valve
5V-belt [Optional]16Suction Filter Tank(with Vacuum Gauge)

Order Enquiry Form